Depending on the year of manufacture, the mounting points may vary slightly.
How to remove the front bumper
- open the hood.
- under the hood, unscrew the four screws and pull out the five clips that secure the grille cover.
- on the lower side, unscrew ten screws and remove two clips (twisted and inserted from the bottom up), which attach the left and right fender (lower part) and plastic lining.
- we bend the lining down with our hands, unscrew the two screws under it and pull out the two clips.
- turn the wheels left and right in turn.
- in the wheel arches, remove the clips that attach the front half of the wheel arch extensions.
- we release the wheel arch extensions from the bumper (they are held on the inner pistons, take the bottom with your hands and pull it towards you).
- under the wheel arch extensions, we take out three clips on each side that hold the fenders and unscrew one screw on each side that attaches the corners to the plastic brackets in the wings.
- we release the latches in the wings (you need to pull the corners towards you with a jerk).
- with the assistant, we remove the bumper forward (be careful not to break the wires).
- we release the connectors of electrical equipment.
How to remove the rear bumper
- open the trunk lid.
- in the trunk opening, remove the four plugs and unscrew the four screws under them.
- on the bottom side, remove five clips and unscrew the four screws (twisted and inserted from the bottom up).
- in the wheel arches, we remove the clips that attach the slats.
- we release the wheel arch extensions (they are held on the inner pistons, you need to gently pull on yourself).
- behind the expanders of the wheel crocs, on each side, we unscrew the screw and remove the clip.
- we release the sides from the latches in the wings (we pull the corners towards ourselves with our hands).
- with the assistant, we remove the bumper back (we look behind the wires).
- we release the connectors of the parking assistant and alarm devices (if installed).
Mazda MX-30 MK1. DR model code. Production: 2020-present (2025).
Body type:
5-door SUV (Subcompact Crossover SUV)
Build: Japan: Hiroshima (Hiroshima Plant)
Plastic bumpers:
Polypropylene with the addition of filler. Marking >PP-(T21+S24)<