How to remove the front bumper
- open the hood.
- under the hood, we unscrew the three screws that secure the radiator grille.
- we remove the turn indicators (you need to press the lock with your finger and push the turn indicator forward).
- in the opening of the turn indicators, unscrew two plastic nuts and remove the radiator grille.
- under the radiator grille, unscrew the two screws that secure the upper part of the front bumper.
- turn the wheels to the side.
- in the wheel arches, we unscrew three screws on each side, which fasten the fenders (front part).
- in the front part, unscrew two screws and remove the central decorative cover (held on latches).
- we unscrew two screws under the cover plate.
- with the assistant, we remove the bumper forward from the rails in the wings (we take the sides and pull forward).
- disconnect the electrical equipment connectors (if any).
How to remove the rear bumper
- in the inner part of the wings, we unscrew two screws on each side, which fasten the sides of the rear bumper.
- on the bottom side, we unscrew three bolts (twisted from the bottom up) that attach the brackets to the body.
- we release the retainers in the wings and with the assistant we remove the bumper back.
- we release the connectors of electrical equipment (if any).
Volkswagen Caddy II. Type 9K/9U
Production 1996-2004
Body type:
4-door van
3-door van
4-door minivan
2-door utility compartment
Plastic bumpers (may differ):
A mixture of polypropylene and polyethylene. Marking >PP/PE<