Depending on the year of manufacture and body type, the mounting points may vary slightly.
How to remove the front bumper
- open the hood.
- remove the hood release lever (pull up).
- unscrew the four screws that secure the upper part of the front bumper.
- on the bottom side, we unscrew nine screws (twisted from the bottom up), which fasten the lower part.
- we turn the wheels depending on which side you will disassemble.
- in the wheel arches, we unscrew two screws on each side, which attach the fenders (front part) and one (twisted from bottom to top), which attach the corners to the wings.
- release the sides from the latches in the wings (pull on yourself).
- with the assistant, we remove the bumper forward (we look behind the wires).
- on the left side, disconnect the connectors of electrical equipment.
How to remove the rear bumper
- open the trunk lid (door).
- in the trunk opening, unscrew the two screws that secure the upper part of the rear bumper.
- we lie down under the car, unscrew the screws and pull out the pistons (twisted and inserted from the bottom up), which fasten the lower part.
- in the wheel arches, we unscrew four screws on each side, which fasten the fenders (rear part) and the sides of the rear bumper.
- release the latches in the wings (pull the sides towards you).
- release the latches under the taillights.
- with the assistant, we remove the bumper back (we look so as not to break the wires).
- we release the connectors of electrical equipment.
Volkswagen Caddy fourth generation. SB Type
Production 2020-present
Plastic bumpers (may differ):
A mixture of polypropylene and a triple copolymer of ethylene, propylene and diene, polyethylene, 10% mineral filler. Marking >PP+EPDM+PE-TD10<