Depending on the year of manufacture and body type, the mounting points are slightly different.
How to remove the front bumper
- open the hood.
- we pull out the pistons and remove the three plastic facings (the facings above the headlights are removed first).
- under the middle trim, we unscrew the eight screws (TORX 25, twisted from top to bottom) that secure the upper part of the front bumper.
- on the bottom side, we unscrew eight screws (TORX 25, twisted from the bottom up) that secure the lower part (if you want to remove it together with the lower radiator lining, unscrew the far screws).
- turn the wheels one by one inside the wheel arch.
- in the wheel arches, we unscrew five screws on each side (TORX 25), which fasten the front part of the fenders.
- (on each side) push the edge of the fender to the side and unscrew the two screws (8 mm, twisted from bottom to top) that attach the side to the bracket in the wing.
- we release the sides from the retainers in the wings (we take the corner and pull first down, then towards ourselves).
- with the assistant, we remove the bumper forward (pay attention to the wires).
- disconnect the connectors of electronic components.
How to remove the rear bumper
- lift up the trunk lid.
- (Volvo V90) under the trunk lid, unscrew and remove the two stop elements (inside the stop you need to unscrew the screw).
- on the bottom side, we unscrew the four screws that secure the lower part.
- we go to the wheel arches, unscrew five screws on each side, which fasten the rear half of the fenders.
- we move the edge of the fenders and unscrew one screw on each side, which fix the corners to the wings, remove the plastic retainers.
- release the latches in the wings (pull the corner down and on yourself).
- release the latches under the taillights and in the trunk opening.
- with the assistant, we remove the bumper back (we look behind the wires).
- disconnect the connectors of electrical equipment.
Volvo S90 MK2 / Volvo V90 MK2, production 2016-present.
Assembling:
Sweden: Göteborg
China: Daqing
Body type:
4-door sedan (S90)
5-door station wagon (V90)
Plastic bumpers (may differ): Polypropylene plus triple copolymer of ethylene, propylene and diene, 20% mineral filler. Marking >PP/EPDM+TD20<