How to remove the front bumper
- open the hood.
- unscrew the two screws and remove the pads under the headlights.
- we unscrew four screws on each side and remove the headlights.
- under the headlights, we unscrew the two bolts that attach the metal amplifier to the brackets.
- remove the pads near the fog lights (held on the latches).
- unscrew the screws and remove the fog lights (if any).
- unscrew the two bolts of the lower amplifier mount.
- unscrew the wheels to the left or right, depending on which side of the bumper you will unscrew first.
- unscrew the screws securing the fenders to the bumper.
- we pull the edges of the bumper from the side locks (we pull the edge of the bumper down and towards ourselves)
- with an assistant, we pull the front bumper forward.
- disconnect the headlight washer hoses (if any).
How to remove the rear bumper
- open the trunk lid.
- lift the trunk floor covering.
- in the luggage compartment, we unscrew the four bolts that attach the amplifier brackets to the body.
- unscrew the screws that secure the slats (rear part).
- we pull off the corners from the side locks (we pull the edge of the bumper down and towards ourselves).
- we pull out the bumper on ourselves (it is advisable to do this together, so as not to scratch the paint on the wings).
Audi 100 C4 (1990–1994)
Production 1990-1994
Body type:
4-door sedan
5-door station wagon
Plastic of bumpers: polypropylene, marking >PP<