Depending on the year of manufacture, the mounting points may vary slightly.
How to remove the front bumper
- open the hood.
- under the hood, unscrew the screw, pull out two pistons and remove the plastic cover.
- under the cover plate, unscrew the three screws that secure the upper part of the front bumper.
- on the bottom side, we unscrew eleven screws that secure the lower part (twisted from the bottom up).
- we twist the wheels to the side.
- in the wheel arches, we unscrew three screws on each side, which fasten the fenders (front part).
- we take the fenders to the side and unscrew the same screw on each side (twisted from bottom to top), which fasten the corners to the wings.
- we release the latches in the wings (we take the corner and pull it towards us).
- release the latches under the headlights and under the hood.
- with an assistant, we pull the bumper forward (we look for wires and hoses).
- disconnect the connectors of electrical equipment.
- if there are headlight washers, disconnect the hoses.
How to remove the rear bumper
- open the trunk lid.
- in the wheel arches, we unscrew two screws on each side, which fasten the fenders (the rear part, in order not to remove the wheels, use a ratchet with a nozzle).
- on the bottom side, unscrew the two screws and pull out the two pistons (twisted and inserted from the bottom up) that secure the lower part of the rear bumper.
- we release the latches in the wings (we pull down at the corners and at ourselves).
- release the latches under the taillights and in the trunk opening.
- we pull the bumper back (we look for wires).
- we release the connectors of electrical equipment.
Audi A1 second generation (GB)
Production: 2019-present
Body type:
5-door hatchback
Bumper plastics: A mixture of polypropylene and a triple copolymer of ethylene, propylene and diene + 20% filler, marked > PP+EPDM-TD20<