Depending on the year of manufacture, the mounting points are slightly different.
How to remove the front bumper
- raise the hood.
- under the hood, pull out the four pistons (inserted from top to bottom), release them from the latches (pull on yourself) and remove the radiator grille.
- under the radiator grille, pull out four pistons (inserted from top to bottom).
- we turn the wheels into the inner part of the arch.
- we release the front part of the wheel arch extensions (they are held on the latches, we pull on ourselves starting from the bottom).
- under the expanders, we unscrew one bolt on each side, which fasten the corners to the wings.
- we unscrew the four screws on each side that secure the fenders and deflectors (since 2019, we pull out two more pistons), release the fenders.
- on the bottom side, unscrew two screws (since 2019, six bolts and two pistons) and remove the lower cover.
- under the cover, we unscrew four bolts (10 mm, twisted from bottom to top) that secure the lower part of the front bumper.
- release the latches in the wings (pull on yourself).
- with the assistant, we remove the bumper forward (be careful not to break the wires and hoses).
- disconnect the common electrical connector and hoses.
How to remove the rear bumper
- open the trunk lid.
- in the trunk opening, we pull out two plastic plugs.
- in the side linings of the trunk, open the covers.
- under the covers, unscrew two plastic screws and remove the taillights.
- under the taillights, we unscrew one screw on each side that secures the upper part of the rear bumper.
- on the bottom side, unscrew the four bolts and remove the cover (held on the latches).
- we unscrew two bolts under the lid.
- we unscrew two bolts on each side (twisted from the bottom up) closer to the wheel arches.
- we release the wheel arch extensions (rear part, you need to pull on yourself).
- in the wheel arches, we unscrew two screws on each side and release the rear part of the fenders.
- under the wheel arch extensions, we unscrew one bolt on each side, which fasten the corners to the wings.
- release the latches in the wings (pull the corners towards you).
- release the latches in the trunk opening (push down on the latches with a flat screwdriver and pull towards you).
- with the assistant, we remove the bumper back (we look so as not to break the wires).
- on the right side, disconnect the common connector of electrical equipment.
Land Rover Discovery Sport Series 1, model code L550, production: 2014-present. Restyling 2019-present.
Body Type: 5-door SUV
Assembling:
United Kingdom: Jaguar Land Rover Halewood, Liverpool
China: Changshu (Chery Jaguar Land Rover)
Brazil: Itatiaia (Jaguar Land Rover Brazil)
India: Pune (Jaguar Land Rover India)
Plastic bumpers (may differ):
A mixture of polypropylene and ethylene / propylene, 15% filler. Marking >PP+E/P+TD15<
Polyethylene plus 12% filler, > PP-12%TF<