Depending on the year of manufacture, the mounting points may vary slightly.
How to remove the front bumper
- open the hood.
- under the hood, unscrew the three screws and remove the radiator grille (the lower part of the grille is held on four latches, you need to pull forward. Attention, do not scratch the paint).
- under the radiator grille, pull out the four plugs and unscrew the four screws through the holes.
- in the lower bumper grille, unscrew two screws (twisted from the bottom up).
- on the bottom side, release the four plastic retainers (you need to turn 90°) and remove the cover plate.
- under the cover plate, we unscrew six screws (twisted from the bottom up).
- we turn the wheels one by one to the side.
- in the wheel arches, unscrew one screw on each side and release the fenders (front part).
- behind the slats, we unscrew one screw on each side that attaches the corners to the brackets.
- release the sides from the clamps in the brackets (pull on yourself and forward)
- with an assistant, we remove the bumper forward (be careful not to break the wires and hoses).
- we release the connectors of electrical equipment.
- disconnect the common hose of the headlight washer system (attention, liquid will flow out).
How to remove the rear bumper
- in the trunk opening, remove the cover plate (it is held on the latches, you need to pry it up and pull it up).
- under the cover plate, we unscrew five bolts (twisted from top to bottom) that secure the upper part of the rear bumper.
- on the bottom side, we unscrew five bolts (twisted from the bottom up, you can not completely unscrew them, just a few turns are enough).
- in the wheel arches, unscrew two screws on each side and pull out two pistons (inserted from the bottom up).
- release the latches in the wings (pull the corners towards you).
- with the assistant, we remove the bumper back (we look so as not to break the wires).
- disconnect the connectors of electrical equipment.
Land Rover Range Rover Series 3, model code L322, production: 2001–2012. Restyling 2005-2009, 2009-2012.
Body type:
5-door SUV
Assembling:
United Kingdom: Solihull
Plastic bumpers (may differ):
Polypropylene plus a triple copolymer of ethylene, propylene and diene. Marking >PP+EPDM<