Depending on the year of manufacture, the mounting points may vary slightly.
How to remove the front bumper
- open the hood.
- under the hood, we unscrew the four screws (twisted from top to bottom) that secure the radiator grille.
- remove the radiator grille (it is held on four latches, you need to pull forward).
- under the radiator grille, unscrew the four screws (twisted from top to bottom).
- on the bottom side (if installed, pull out six clips and first remove the cover plate), release four plastic clips (you need to turn 90°) and remove the cover (held on the latches, pull forward).
- under the cover, we unscrew the six screws (twisted from bottom to top) that secure the lower part of the front bumper.
- we turn the wheels in turn to the inside of the arch.
- in the wheel arches, we unscrew four screws (two on the bottom side) on each side and release the fenders (front part).
- we push the fenders to the side and unscrew one screw on each side that attaches the sides to the headlights.
- release the sides from the latches in the wings (pull on yourself).
- release the latches under the radiator grille.
- with the assistant, we remove the bumper forward (attention, do not break the wires and hoses).
- on the left side, we release the connectors of electrical equipment.
- on the right side, disconnect the common hose of the headlight washing system (attention, liquid will flow out).
How to remove the rear bumper
- we remove the pads between the fender and bumper (they are held on latches, you need to pry them from the side of the wheel and pull them towards you).
- under the pads, we unscrew two screws on each side.
- open the trunk.
- in the trunk opening, pull out three clips (inserted from top to bottom).
- on the bottom side, release two plastic clips (you need to turn 90°) and remove the cover.
- under the cover, disconnect the common connector of electrical equipment.
- we unscrew the six screws (twisted from bottom to top) that secure the lower part of the rear bumper.
- in the wheel arches, we unscrew three screws on each side, which fasten the fenders (rear part).
- we release the latches in the wings (we take the corner and pull it towards us).
- with the assistant, we remove the bumper back.
Land Rover Range Rover Series 4, model code L405, production: 2012-2022. Restyling 2017-2022.
Body type:
5-door 4x4 / suv
Assembling:
Solihull Plant, England
Plastic bumpers (may differ):
A mixture of polypropylene and ethylene / propylene, 15% filler. Marking >PP+(E/P+TD15)<