How to remove the front bumper
- lift up and fix the hood.
- under the hood, we pull out two thrust clips (inserted from top to bottom) that attach the upper part of the front bumper.
- remove the license plate along with the frame.
- under the license plate, pull out two clips.
- on the bottom side, unscrew the four screws (twisted from the bottom up).
- we turn the front part of the wheels in turn into the inner part of the arch.
- in the wheel arches, we pull out three clips on each side, which fasten the slats.
- we release the latches in the wings (we take the corner and pull it with a jerk).
- with an assistant, we remove the front bumper forward (we look behind the wires)
- if there is, disconnect the connectors from the fog lights.
How to remove the rear bumper
- open the trunk lid.
- we unscrew two screws in the trunk opening.
- free up access to the rear panel of the trunk.
- through the holes in the back panel, unscrew three nuts.
- in the arches we take out two clips on each side that secure the mudguards.
- on the bottom side, we unscrew two screws (twisted from the bottom up).
- we release the latches in the wings (we take the corner and pull it with a jerk).
- release the latches under the taillights.
- with the assistant, we remove the bumper back.
Mazda 2 MK1. Model code DY, also called Mazda Demio MK2.
Production: (2002-2007).
Body type:
5-door hatchback
Assembling:
Japan: Hiroshima (Hiroshima Plant)
Spain: Almussafes (Ford Valencia)
Plastic bumpers:
Polypropylene plus 10% mineral filler. Marking >PP+T10<