How to remove the front bumper
- lift up and fix the hood.
- under the hood, we pull out six clips and unscrew the two screws that secure the radiator grille and the upper part of the front bumper.
- on the bottom side, we unscrew six screws and pull out two clips that attach the lower part (twisted and inserted from the bottom up).
- in the wheel arches, we unscrew one screw on each side, which fix the corners to the brackets in the wings.
- we release the latches in the wings (we take the corner and pull it with a jerk).
- with an assistant, we remove the front bumper forward (we look so as not to break the wires)
- if there is, disconnect the connectors from the fog lights.
How to remove the rear bumper
- open the trunk lid.
- in the trunk opening, unscrew the two screws that secure the upper part of the rear bumper.
- in the wheel arches, pull out three clips on each side and release the slats (rear part).
- on the bottom side, unscrew two screws and pull out two clips (twisted and inserted from the bottom up).
- we release the latches in the fenders (we take the corner of the bumper and pull it with a jerk).
- release the latches under the taillights.
- with the assistant, we remove the bumper back (we look behind the wires).
- disconnect the connectors of electrical equipment.
Mazda 2 MK2. Model code DE/DH. Also called the Mazda Demio MK3.
Production: (2007-2014). Restyling 2010-2014.
Body type:
3-and 5-door hatchbacks
4-door sedan
Assembling:
Japan: Hiroshima (Hiroshima Plant)
China: Nanjing / Hainan (Changan Ford Mazda)
Thailand: Rayong (AAT)
Colombia: Bogotá (CCA)
Iran: Tehran (Bahman Group)
Vietnam: Nui Thanh, Quang Nam (Truong Hai Auto Corporation
Plastic bumpers:
Polypropylene plus 16% mineral filler. Marking >PP-(S22+T16)<