How to remove the front bumper
- open the hood.
- under the hood, unscrew the two screws and pull out the four clips that secure the upper part of the front bumper.
- on the bottom side, we unscrew ten bolts (twisted from bottom to top) that secure the lower part.
- turn the wheels to the inside of the arch.
- (on the left and right sides) in the wheel arch, we pull out three clips that attach the fender (front part).
- (on the left and right sides) we take the fender to the side and unscrew the screw (twisted from bottom to top), which fix the corner to the wing.
- release the latches in the wings (pull the corner towards you).
- with an assistant, we remove the front bumper forward (we look so as not to break the wires).
- we release the connectors of fog lights and other electrical equipment (if any).
How to remove the rear bumper
- open the trunk lid.
- we unscrew two screws on each side, release them from the retainers in the wings and remove the taillights.
- in the trunk opening, we unscrew the four screws that secure the upper part of the rear bumper.
- on the bottom side, unscrew the two screws and pull out the two clips (twisted and inserted from the bottom up) that secure the lower part.
- in the wheel arches, we unscrew two screws, pull out two clips, release the edges of the fenders from the retainers.
- we take the fenders to the side and unscrew one screw on each side, which fix the corners to the brackets in the wings.
- release the latches in the wings (pull the corners towards you).
- release the latches under the taillights.
- with the assistant, we remove the bumper back (we look behind the wires).
- disconnect the electrical equipment connectors (if installed).
Mazda 5 MK2. The CW model code. Production: (2010-2018)
Also called Mazda Premacy
Body type: 5-door minivan
Assembling:
Japan: Hiroshima (Hiroshima Plant)
Taiwan: Zhongli (Ford Lio Ho)
Plastic bumpers:
Polypropylene plus filler. Marking >PP-(S27+T17)<