Depending on the year of manufacture, the mounting points may vary slightly.
How to remove the front bumper
- open the hood.
- under the hood, we unscrew two screws and pull out two pistons (there may be four screws) that attach the upper part of the front bumper (radiator grille).
- on the bottom side, we unscrew the four screws (twisted from bottom to top) that secure the lower part.
- turn the wheels to the side.
- in the wheel arches, we unscrew two screws on each side, which attach the fenders (front part) and one (twisted from bottom to top), which attach the corners to the wings.
- remove the license plate along with the frame and unscrew the two screws behind it.
- remove the decorative pads near the fog lights (held on the latches) and unscrew the two screws under them.
- release the latches in the wings (pull the corners towards you).
- with the assistant, we remove the bumper forward (we look so as not to break the wires).
- disconnect the electrical equipment connectors (if any).
How to remove the rear bumper
- remove the license plate light connectors (other electrical equipment, if available).
- on the bottom side, we unscrew four bolts (two nuts) that attach the amplifier brackets to the spars (you will need a strong crank with a cap head or a powerful wrench).
- with an assistant, we pull the brackets out of the body (you need to make an effort).
Volkswagen Amarok first generation, Type 2F
Production 2010-2022
Body type:
2-door single cab
4-door double cab
Plastic bumpers:
A mixture of polypropylene and a triple copolymer of ethylene, propylene and diene, 20% mineral filler. Marking >PP/EPDM TD10<