How to remove the front bumper
- open the hood.
- under the hood, we unscrew two screws and pull out five pistons that attach the upper part of the front bumper.
- on the bottom side, we unscrew the three screws (twisted from bottom to top) that secure the lower part.
- turn the wheels to the inside of the arch.
- in the wheel arches, we unscrew five screws on each side, which fasten the fenders (front part).
- if there are headlight washers, pull up the injectors, release the latches and remove the covers.
- release the latches in the wings (pull the corners towards you).
- release the latches under the headlights and above the headlights (indicated by the blue arrows).
- with the assistant, we remove the bumper forward (we look behind the wires).
- disconnect the connectors from the fog lights (if any).
How to remove the rear bumper
- open the trunk lid.
- under the trunk lid, unscrew the two screws that secure the upper part of the rear bumper.
- on the bottom side, we unscrew the three screws (twisted from bottom to top) that secure the lower part.
- in the wheel arches, we unscrew four screws on each side and release the fenders (rear part).
- we release the latches in the wings (we take the corner and pull it with a jerk).
- release the latches under the taillights (indicated by the blue arrows).
- with the assistant, we remove the bumper back (pay attention to the wires).
- disconnect the parking assistant connectors (if any).
Volvo C70 MK2, production 2006-2013, restyled 2010-2013.
Assembling:
Sweden: Uddevalla (Uddevallaverken)
Italy: Turin (Pininfarina)
Body type: Coupe-cabriolet
Plastic bumpers (may differ):
Polypropylene plus triple copolymer of ethylene, propylene and diene, 20% mineral filler. Marking >PP+EPDM-TD20<