How to remove the front bumper
- we unscrew one nut on each side and remove the scrapers of the headlight cleaners along with the levers.
- turn the wheels inside the arch.
- we unscrew three screws on each side, which fasten the fenders (front part).
- in the lower part of the bumper, open two covers and unscrew two long bolts under them, which attach the aluminum amplifier to the brackets (you will need a cap head with an extension cord).
- (we need two people) we remove the bumper forward from the guide brackets in the wings (we look for wires).
- disconnect the connectors from the fog lights (if any).
How to remove the rear bumper
- lift up the trunk lid.
- from the trunk, unscrew two nuts on each side and remove the pads under the taillights.
- in the wheel arches, we unscrew three screws on each side, which fasten the fenders (rear part).
- on the bottom side, we unscrew two long bolts that attach the aluminum amplifier to the brackets (to pull out the left bolt, you need to lower the muffler a little).
- remove the rear bumper back from the guide brackets in the fenders (pay attention to the wires).
- disconnect the electrical connectors (if any).
Volvo C70 MK1, produced 1996-2005.
1996-2002 (C70 coupe)
1997-2005 (C70 convertible)
Build: Sweden: Uddevalla (Uddevallaverken)
Body type:
2-door convertible
2-door compartment
Plastic bumpers (may differ):
Polypropylene, 20% mineral filler. Marking >PP-T20<