How to remove the front bumper
- raise and fix the hood.
- click on the retainers (indicated in the diagram by blue arrows) and remove the radiator grille.
- pull up two locking bars on each side and remove the headlights.
- we unscrew the six bolts (twisted from top to bottom) that secure the upper part of the front bumper.
- in the inner part of the fenders, behind the headlights, we unscrew one screw on each side, which fasten the wheel arch extensions.
- we unscrew the six screws (twisted from bottom to top) that secure the lower part.
- turn the wheels inside the arch.
- in the wheel arches, we unscrew the screws and pull out the pistons that attach the fenders and wheel arch extensions.
- we remove the wheel arch extensions (they are held on the latches, we pull them towards us).
- under the wheel arch extensions, we unscrew one screw on each side, which fix the corners to the wings.
- disconnect the fog lamp connectors.
- disconnect the headlight washer hose from the pump.
- with the assistant we remove the front bumper.
How to remove the rear bumper
- open the trunk.
- unscrew the two screws on each side that secure the taillights.
- we release the retainers in the wings and remove the taillights.
- under the taillights, we unscrew the two screws that secure the upper part of the rear bumper.
- in the trunk opening, we pull out four pistons (inserted from top to bottom, the pistons are hard to reach).
- on the bottom side, we unscrew six screws (twisted from the bottom up), which fasten the lower part.
- unscrew the screws and remove the mudguards.
- we unscrew two screws, pull out two pistons on each side and remove the wheel arch extensions (they are held on the latches, we pull them with a jerk).
- behind the wheel arch extensions, we pull out one piston on each side, which fasten the corners to the wings.
- through the opening of the left rear light, disconnect the common connector of parking sensors.
- with the assistant, we release the latches in the wings (pull on ourselves) and remove the bumper back.
Land Rover Discovery Series IV / RL4, model code L320, production: 2009–2016. Restyling 2013-2016.
Body Type: 5-door SUV
Assembling:
United Kingdom: Solihull (Solihull plant)
Jordan: Aqaba (Aqaba plant)
Plastic bumpers (may differ):
Polypropylene plus triple copolymer of ethylene, propylene and diene, 12% mineral filler. Marking >PP+EPDM+T12<