Depending on the year of manufacture, the mounting points may vary slightly.
How to remove the front bumper
- open the hood.
- release the four latches (you need to push down) and remove the radiator grille (pull on yourself).
- (on the left and right sides) lift up the two fixing bars and remove the headlight.
- under the radiator grille and headlights, we unscrew the six screws (twisted from top to bottom) that secure the upper part of the front bumper.
- on the bottom side, release the four locking elements (you need to turn 90°) and remove the towing hook cover (pull forward).
- we unscrew the eight screws (twisted from bottom to top) that secure the lower part.
- we unscrew one screw at a time in the wheel arches that secure the sides.
- on the left side, behind the fender, disconnect the hoses of the headlight washing system from the pump (liquid will flow out, you need to prepare the container).
- on the right side, under the headlight, disconnect the connectors of electrical equipment.
- release the latches in the wings (pull the corners towards you).
- with the assistant we remove the bumper forward.
How to remove the rear bumper
- open the trunk lid.
- we unscrew two screws on each side, release the retainers in the wings and remove the taillights.
- under the left taillight, disconnect the electrical connectors.
- in the trunk opening, we release the plastic cover from the latches and remove it.
- under the cover plate, pull out four clips (inserted from top to bottom).
- on the bottom side, we unscrew six screws (twisted from the bottom up).
- in the wheel arches, we unscrew one screw on each side, which fix the corners to the brackets.
- we release the latches in the wings (we take the corner and pull it towards us).
- with the assistant, we remove the bumper back.
Land Rover Range Rover Sport Series 1, model code L320, production: 2005–2013. Restyling 2009-2013.
Body type:
5-door 4x4 SUV
Assembling:
United Kingdom: Solihull (Solihull plant)
Plastic bumpers (may differ):
Polypropylene plus triple copolymer of ethylene, propylene and diene, 12% mineral filler. Marking >PP+EPDM-TF12<