Depending on the year of manufacture and body type, the mounting points may vary slightly.
How to remove the front bumper
- open the hood.
- under the hood, we unscrew two screws, pull out two clips, remove two thrust pistons, release them from the latches and remove the radiator grille.
- we pull out two pistons that attach the upper part of the front bumper.
- unscrew the two screws and pull out the two clips that secure the lower part.
- we unscrew one screw on each side, which fix the corners to the wings (twisted from the bottom up).
- we release the latches in the wings (you need to pull the corners towards yourself).
- remove the bumper forward (make sure that the wires don't break).
- release the fog lamp connectors (if any).
How to remove the rear bumper
To remove the rear bumper, it is tedious to unscrew four bolts. We climb under the car and unscrew two bolts on each side with the cap head, which attach the amplifier brackets to the body. These bolts usually stick very hard, so you will need a strong long collar. Before unscrewing, treat the bolts with a penetrating lubricant.
Mazda BT-50 MK1. The UN model code. Production: 2006-2011.
Body type:
2-door single cab
2-door extended cab
4-door double cab
Assembling:
Thailand: Rayong (AAT)
Colombia: Bogota (CCA)
Zimbabwe: Willowvale (Willowvale Motor Industries)
South Africa: Silverton, Pretoria (Ford South Africa)
Plastic bumpers:
Polypropylene. Marking >PP<