How to remove the front bumper
- open the hood.
- pull out two clips and remove the hood lock pad.
- unscrew the four screws and pull out the four clips that secure the upper part of the front bumper (radiator grille panel).
- under the car, unscrew ten screws and pull out two clips (twisted and inserted from the bottom up), which attach the lower part of the bumper to the lower protective lining and fenders.
- bend the protective lining down and pull out two clips.
- turn the front part of the wheels to the inside of the arch.
- in the wheel arches, we pull out two clips on each side, which attach the wheel arch extensions.
- we release the front part of the wheel arch extensions (they are held on internal clips, you need to pull them up from the bottom).
- under the wheel arch extensions, we pull out two clips on each side that attach the fenders and unscrew one screw on each side that attach the corners to the brackets in the wings.
- we release the latches in the wings (you need to pull the corners of the bumper towards you).
- we release the retainers in the front part (you need to pull the lower part of the radiator grille towards you).
- remove the bumper forward (pay attention to the wires and hoses).
- we release the connectors of electrical components.
- if the headlight washer system is installed, disconnect the common hose from the washer tank pump.
How to remove the rear bumper
- open the trunk lid.
- we unscrew two screws in the trunk opening.
- in the trunk, in the side panels, open the hatches.
- under the hatches, disconnect the electrical connectors and unscrew three nuts on each side that attach the taillights.
- we release the taillights from the wing clips and remove them (pull the taillight to the side from the trunk side, then pull it towards you).
- from the bottom side, pull out two clips and unscrew the four screws (twisted and inserted from the bottom up).
- in the wheel arches, we pull out two clips on each side that attach the wheel arch extensions and two clips that attach the fenders.
- we release the rear part of the wheel arch extensions (they are held on internal clips, you need to pull on yourself, starting from the bottom).
- under the wheel arch extensions, we unscrew one screw and pull out two clips on each side.
- we release the latches in the wings (we take the corner and pull on ourselves).
- carefully remove the bumper back (pay attention to the reins).
- we release the connectors of parking sensors and parking lights (if installed).
Mazda CX-5 MK1. Model code KE. Production: 2012-2017. Restyling 2015-2017.
Body type:
5-door SUV (Compact crossover SUV).
Assembling:
Japan: Hiroshima (Ujina Plant No.2)
China: Nanjing (Changan Mazda)
Malaysia: Kulim (Inokom)
Russia: Vladivostok (Mazda Sollers)
Vietnam: Quảng Nam (THACO Auto)
Plastic bumpers:
Polypropylene with the addition of filler. Marking >PP-(T25+S20)<.