How to remove the front bumper
- lift up and fix the hood.
- pull out two clips and remove the hood lock cover (two clips are hidden under the cover).
- unscrew the four screws and pull out the six clips (twisted and inserted from top to bottom) that secure the top panel of the radiator grille.
- on the bottom side, unscrew ten screws and pull out two clips (twisted and inserted from the bottom up), which attach the mudguard of the radiator support and the fenders to the lower part of the bumper.
- bend the mudguard of the radiator support down (it is not necessary to remove it) and pull out two clips (inserted from the bottom up).
- turn the steering wheel to the side.
- in the wheel arches, we pull out two clips on each side that attach the wheel arch extensions and two clips that attach the fenders (front part).
- we release the wheel arch extensions from the bumper (they are held on internal clips, we pull them up from the bottom).
- we pull the wheel arch extensions towards ourselves and unscrew one screw on each side, which fasten the corners to the brackets in the wings.
- we release the latches in the wings (you need to pull the corners of the bumper towards you).
- release the retainers in the front part (marked in the picture with a red circle, you need to pull the lower part of the radiator grille towards you).
- remove the bumper forward (pay attention to the wires and hoses).
- we release the connectors of electrical equipment.
- disconnect the common headlight washer nozzle hose (if any).
How to remove the rear bumper
- open the trunk lid.
- in the trunk opening, unscrew the four screws (please note that the screws are of different sizes).
- near the taillights, remove the plugs.
- under the plugs, unscrew two screws on each side and remove the taillights (pull on yourself).
- from the bottom side, pull out four clips and unscrew the four screws (twisted and inserted from the bottom up).
- remove mudguards (if any).
- in the wheel arches, we pull out the clips that attach the wheel arch extensions and fenders (rear part).
- we release the wheel arch extensions from the bumper (they are held on four internal clips, we pull them towards us, starting from the bottom).
- under the wheel arch extensions, we unscrew one screw and pull out four clips on each side.
- we release the latches in the wings (we take the corner and pull on ourselves).
- carefully remove the bumper back (we look so as not to break the wires).
- release the connectors of electrical components (if installed).
Mazda CX-5 MK2. The KF model code. Production: 2017-present (2025). Restyling 2021-present (2025).
Body type:
5-door SUV (Compact crossover SUV).
Assembling:
Japan: Hiroshima (Ujina Plant No.2); Hōfu (Hofu Plant)
Malaysia: Kulim (Inokom)
China: Nanjing (Changan Mazda)
Russia: Vladivostok (Mazda Sollers)
Vietnam: Chu Lai, Quảng Nam (THACO Auto)
Plastic bumpers:
Polypropylene with the addition of filler. Marking >PP-(T25+S20)<.