How to remove the front bumper
- open and fix the hood.
- under the hood, pull out five pistons (inserted from top to bottom), release the hood lock lever from the latches.
- on the bottom side, we unscrew the four screws that attach the lower part to the cover plate (if necessary, you can remove the bumper along with the cover plate).
- turn the wheels to the side.
- in the wheel arches, we unscrew six screws on each side (TORX T25), which fasten the fenders and sides (the front part, the two lower screws are hidden behind the fenders).
- we move the fenders to the side and unscrew two bolts on each side (twisted from the bottom up), which attach the sides to the wings (you need an 8 mm head with a long collar).
- we release the sides from the retainers in the wings (we take the corner and pull it down and towards ourselves).
- release the latches under the headlights.
- with the assistant, we remove the bumper forward (pay attention to the wires and hoses).
- disconnect the connectors of fog lights and sensors.
- if the headlight cleaning system is installed, disconnect the common hose (please note that liquid will flow out of the hose, you need to prepare a container or bend the hose).
How to remove the rear bumper
- open the trunk lid.
- in the trunk opening, turn your hands counterclockwise by 45° and remove the shock absorbers.
- remove the lower part of the rubber seal.
- near the rear lights, remove the plastic plugs (they are held on latches, you need to pry them with a screwdriver).
- on the bottom side, we unscrew the four screws (TORX T25, twisted from the bottom up).
- (on both sides) in the wheel arches, we unscrew the six screws that secure the fender (rear part).
- (on both sides) push the fender cover to the side and unscrew the screw (TORX T25, twisted from bottom to top) that secures the corner to the wing.
- release the latches in the wings (pull the corners towards you with a jerk).
- release the latches under the taillights (pull them towards you with a jerk).
- with the assistant, we remove the bumper back (we look behind the wires).
- under the right rear light, disconnect the electrical connector.
Volvo XC60 MK2, 2017-present, facelifted 2021-present.
Assembling:
Sweden: Torslanda (Torslandaverken); Gothenburg (Polestar Performance AB)
China: Chengdu (ZAMC)
Malaysia: Shah Alam (VCMM)
Body Type: 5-door SUV
Plastic bumpers (may differ): A mixture of polypropylene and ethylene / propylene, 20% filler. Marking >PP+E/P-MD20<